View CLD-DS41_4522629.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CLD-DS41 revi s ion 0 product family data sheet cree ? xlamp ? xt-e royal blue leds www.cr ee.com/xlamp copyright ? 2010 cree, i nc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description xlamp xt- e royal blue is a high performing source of royal blue light for remote phosphor applica - tions and sets new standards of eff - ciency and light extraction in royal blue l e ds. the xt-e royal blue is designed to enable faster adoption of led light in high effcacy lighting products. compared to the stan - dard xlamp xp- e royal blue, the xt- e royal blue is up to 20% more effcient. cree xlamp l e ds bring high per - formance and quality of light to a wide range of lighting applica - tions, including remote phosphor, color-changing, portable and per - sonal, outdoor, indoor-directional, transportation, stage and studio, commercial and emergency-vehicle lighting. note : f or remote phosphor ap- plications, a separate license to certain cree patents is required. features ? sorted into 2.5 nm wavelength bins ? binned at 85c ? low thermal resistance: 5c/w ? wide viewing angle: 140 ? maximum drive current: 1000 ma ? maximum junction tempera - ture: 150c ? e lectrically neutral thermal path ? vf binning ? unlimited foor life at 30oc/85% rh ? refow solderable - jedec j-std-020c compatible table of contents cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2011 cree, i nc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 label with c ree bin code, qty, lot # ...................................... 10 label with customer order code, .. 10 qty, reel id, po# .......................... 10 product characteristics ............... 2 flux characteristics, standard o rder codes and bins - royal blue (t j = 85 c) .............................. 2 relative spectral power distribution ............................... 3 relative flux vs. junction temperature ............................. 3 e lectrical characteristics ............. 4 relative flux vs. current ............ 4 typical spatial distribution .......... 5 thermal design ......................... 5 performance groups - radiant flux (t j = 85 c) .............................. 6 performance groups - dominant wavelength (t j = 85 c) ............. 6 performance groups - foward v oltage (t j = 85 c) ................... 6 bin and o rder code formats ....... 7 refow soldering characteristics .. 7 notes ....................................... 8 mechanical dimensions ............... 9 tape and reel .......................... 10 packaging ................................ 11
2 2 product characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 5 viewing angle (fwhm) degrees 140 temperature coeffcient of voltage mv/c -3.0 esd classifcation (hbm per mil-std-883d) class 2 dc forward current ma 350 1000 reverse v oltage v 5 forward v oltage (@ 350 ma) v 2.85 3.5 reverse current ma -0.1 le d junction temperature c 150 flux characteristics, standard order code and bins - royal blue (t j = 85c) the following table provides order codes for xlamp xt- e royal blue le ds. additional information on the performance grouping and codes for xt- e royal blue leds is on page 6. color dwl kit codes dominant wavelength range order code, minimum radiant flux @ 350 ma, t j =85 c min. max. group dwl (nm) group dwl (nm) flux 475 mw flux 500 mw royal blue 01 d36 450 d57 465 xteary-00-0000-000000k01 xte ary-00-0000-000000l01 02 d36 450 d47 460 xteary-00-0000-000000k02 xte ary-00-0000-000000l02 03 d46 455 d57 465 xte ary-00-0000-000000k03 xte ary-00-0000-000000l03 04 d36 450 d37 455 xte ary-00-0000-000000k04 xte ary-00-0000-000000l04 05 d46 455 d47 460 xte ary-00-0000-000000k05 xte ary-00-0000-000000l05 06 d56 460 d57 465 xte ary-00-0000-000000k06 xte ary-00-0000-000000l06 07 d37 452.5 d46 457.5 xte ary-00-0000-000000k07 xte ary-00-0000-000000l07 08 d47 457.5 d56 462.5 xte ary-00-0000-000000k08 xte ary-00-0000-000000l08 09 d37 452.5 d56 462.5 xte ary-00-0000-000000k09 xte ary-00-0000-000000l09 notes: ? cree maintains a tolerance of 7% on fux and power measurements xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
3 3 relative spectral power distribution relative radiant flux vs. junction temperature (i f = 350 ma) relative spectral power 0% 20% 40% 60% 80% 100% 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) royal blue relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative radiant flux junction temperature (oc) xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
4 4 electrical characteristics (t j = 85c) relative radiant flux vs. current (t j = 85c) electrical characteristics 0 100 200 300 400 500 600 700 800 900 1000 2.25 2.50 2.75 3.00 3.25 forward current (ma) forward voltage (v) relative radiant flux vs. current (tj = 85oc) 0% 50% 100% 150% 200% 250% 0 100 200 300 400 500 600 700 800 900 1000 relative radiant flux (%) forward current (ma) xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
5 5 typical spatial distribution thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. i t is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. typical spatial distribution 0.00 0.20 0.40 0.60 0.80 1.00 - 100 - 80 - 60 - 40 - 20 0 20 40 60 80 100 relative luminous intensity (%) angle (o) thermal design (this is xp-e hew data - which is the right data.) 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 10 c/w rj - a = 15 c/w rj - a = 20 c/w rj - a = 25 c/w xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
6 6 performance groups C radiant flux (t j = 85c) xlamp xt-e royal blue leds are tested for radiant fux and placed into one the following bins. group code minimum radiant flux (mw) maximum radiant flux (mw) 31 475 500 32 500 525 33 525 550 performance groups C dominant wavelength (t j = 85c) xlamp xt-e royal blue leds are tested for dominant wavelength and placed into one of the regions defned by the following bounding coordinates. group code minimum dominant wavelength (nm) maximum dominant wavelength (nm) d36 450.0 452.5 d37 452.5 455.0 d46 455.0 457.5 d47 457.5 460.0 d56 460.0 462.5 d57 462.5 465.0 performance groups C forward voltage (t j = 85c) xlamp xt- e royal blue le ds are tested for forward voltage and placed into one the following voltage bins. group code minimum forward voltage (v) maximum forward voltage (v) f 2.75 3.00 g 3.00 3.25 h 3.25 3.50 xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
7 7 bin and order code format bin codes and order codes are confgured as follows: order code bin code reflow soldering characteristics in testing, cree has found xlamp xt-e leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. sss scc- bd-hhhh-nnnnnnnnn internal code color ry = ro ya l blue series xtea = xt -e color specification kit number sss scc- c- ddd-fff-nn-nnnn series xtea = xt -e dominant wavelength grou p internal code ra diant flux grou p color ry -0 = ro ya l blue xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
8 8 profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3c/second max. 3c/second max. preheat: temperature min (ts min ) 100c 150c preheat: temperature max (ts max ) 150c 200c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183c 217c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215c 260c time within 5c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6c/second max. 6c/second max time 25c to peak temperature 6 minutes max. 8 minutes max. n ote: all temperatures refer to the topside of the package, measured on the package body surface. notes moisture sensitivity in testing, cree has found xlamp xt-e leds to have unlimited foor life in conditions 30oc / 85% relative humidity (rh). moisture testing included a 168-hour soak at 85oc / 85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. vision advisory claim war nin g: do not look at exposed lamp in operation. e ye injury can result. see led e ye safety at http://www.cree. com/products/pdf/xlamp_e yesafety.pdf. xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
9 9 mechanical dimensions all measurements are .13 mm unless otherwise indicated. top view bottom view side view recommended pcb solder pad recommended stencil pattern (shaded area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1.30 .65 .50 2.30 3.30 1.15 3.450 3.450 2.36 .83 .650 r 1.530 .50 .50 .40 1.30 3.30 3.30 1.15 .65 1.65 .50 1.20 .60 .60 3.20 1.60 3.20 .40 .40 .40 1 / 1 24.000 b 2610-00015 outline drawing xp hew -- -- -- -- -- -- 3/8/11 d. cronin revisons rev description by date app'd b removed chip dimensions dc 5/11/11 recommended pcb solder pad recommended stencil pattern (hatched area is opening) xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
10 10 tape and reel all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) 12.0 +.3 -.0 1.75 .10 4.1 8.1 2.5.1 1 / 1 3.000 a 2402-00014 xp hew loading spec -- -- -- -- -- -- 11/29/10 d. cronin revisons rev description by date app'd end start user feed direction cathode side anode side user feed direction 7" 1.5 .1 13mm pocket tape carrier tape size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 drawing scale a 2402-00018 carrier tape xp hew -- -- -- -- -- -- 05/02/11 d. cronin revisons rev description by date app'd .30 [.012] t ao 3.78 [.149] +.10 +.0039 2.38 .0937 ko -.00[ -.0000] 3.78 [.149] bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.78mm [.149"] bo - 3.78mm [.149"] ko - 2.38mm [.094"] size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 drawing scale a 2402-00018 carrier tape xp hew -- -- -- -- -- -- 05/02/11 d. cronin revisons rev description by date app'd .30 [.012] t ao 3.78 [.149] +.10 +.0039 2.38 .0937 ko -.00[ -.0000] 3.78 [.149] bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.78mm [.149"] bo - 3.78mm [.149"] ko - 2.38mm [.094"] size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 1 / 1 drawing scale a 2402-00018 carrier tape xp hew -- -- -- -- -- -- 05/02/11 d. cronin revisons rev description by date app'd .30 [.012] t ao 3.78 [.149] +.10 +.0039 2.38 .0937 ko -.00[ -.0000] 3.78 [.149] bo p2 2.00 [.079] po 4.00 [.157] 10.25 [.404] e2 1.50 +.10 +.0039 -.00[.0591-.0000]do 4.39 [.173] 4.39 [.173] 7.3 12.00 [.472] nominal 12.30 [.484] max w 1.75 [.069] e1 5.50 [.217]f 1.50 [.059] d1 8.00 [.315] p pocket size ao - 3.78mm [.149"] bo - 3.78mm [.149"] ko - 2.38mm [.094"] xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
11 11 packaging cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # xlamp xt-e royal blue leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.

▲Up To Search▲

Price & Availability of CLD-DS41

	To Download CLD-DS41 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .